Arrival

Strip & Metal Fabrication

Mechanical

Body & Paint

Finish

The original Dodge Super Bee was based on the Dodge Coronet two-door coupe, and was produced from 1968 until 1970. It was Dodge’s low-priced powerful muscle car and a rebadged version of the Plymouth Road Runner. The origin of the name, “Super Bee”, has its basis in the “B” Body designation pertinent to Chrysler’s mid-sized cars, including the Road Runner and Charger.

Plymouth’s Road Runner sales were enough to have Dodge Division General Manager, Robert McCurry, request a similar model from the Dodge Styling office. Senior designer, Harvey J. Winn, won a “contest” with the name “Super Bee” and a new logo design based on the Dodge “Scat Pack” Bee medallion. The design of the first Super Bee was influenced by the 1968 Coronet convertible and the show car’s interior was built by the Alexander Brothers. The show car was introduced at the 1968 Detroit Auto Show.

Although the two cars are similar in external appearance, the Super Bee was slightly heavier (approx. 65 lb (29 kg)) and rode on a 117-inch (3,000 mm) wheelbase compared to the Road Runner’s 116 in (290 cm) wheelbase. In addition to minor external differences, such as larger rear wheel openings, the bumblebee tailstripe and fancier grille, and the taillight ornamentation, the Super Bee also used actual diecast chrome-plated “Bee” medallions. These three-dimensional medallions were prominently mounted in a raised position in the grille/hood area and the trunklid/taillight area of the car throughout the first three years of production.

The Super Bee used dash cluster from the Dodge Charger, while the four-speed manual cars received a Hurst Competition-Plus shifter with Hurst linkage; this shifter compared to the Road Runner’s less expensive Inland shifter and linkage. Due to the higher-quality accessories attached to the Super Bee, the car was sold at a higher price in comparison to the Plymouth version and this had a negative effect on sales.

The Super Bee was available with the Hemi engine.  This option raised the price by 33%, and only 125 were sold. The 1968 model was only sold as a two-door coupe, with two engine options, the base 335 hp (250 kW) 383 Magnum, and the 426 Hemi, rated at 425 hp (317 kW).

The Super Bee included a heavy-duty suspension, an optional Mopar A-833 four-speed manual transmission, and high-performance tires. Outside, a stripe (with the bee logo) was wrapped around the tail.

A hardtop version joined the existing pillared coupe body in 1969 and a new optional twin-scooped air induction hood, the “Ramcharger”, became available.This particular option was coded N-96 and was the counterpart to the Plymouth Road Runner’s “Coyote Duster” air induction hood. The “Ramcharger” hood featured forward-facing scoops.

A “six-pack” (three two-barrel carburetors) version of Dodge’s 440 cubic-inch engine was added to the offering list mid-year. The option code for this was A12, which changed the 5th digit of the VIN to M. These special order 1969 1/2 Dodge Super Bees are known as A12 M-code cars. The A12 package also equipped the cars with a Dana 60 axle with a 4:10 gear ratio, heavy duty automatic or a 4-speed transmission, and a ‘lift off’ flat black scooped hood. Other components to the A12 package included heavy duty internal engine parts, black steel rims with high performance G-70 15″ tires, and heavy duty 11″ drum brakes. Only 1,907 A12 M-code 440 Six Pack 1969 1/2 Dodge Super Bees were produced. This option fell half-way between the standard engine and the Hemi as a USD463 option. The 1969 model year included the base 383 Magnum, 440 Six Pack, and the 426 Hemi. The 440 Magnum (4bbl) was reserved for the Coronet R/T.

https://en.wikipedia.org/wiki/Dodge_Super_Bee